As Android MTK IMEI Repair With Volcano Box More Download.

As Android MTK IMEI Repair With Volcano Box More Download.
 

Before taking your phone to repair to a shop or buy a new phone, please try the following procedure to repair Imei device.


first charge the battery with more than 70%, Si dead or brick your phone and then charge the battery with the battery charger or an external charger.
Back up important data if possible as phone book, messages, email, images, configuration, EFS, NV, and copy NAND complete security, and in most cases carry out the SIM card and SD card.
After the firmware update, format or root your device is not possible to recover the data, so the backup online is always important. For all your data, a backup should be performed on an external device, hard drive, RAID system media or SD card. Remember do something like update firmware, root, install custom firmware, stock firmware at your own risk we assume no liability for damage to the device

Repair / change IMEI

• The first installation of MTK controller
• you can find all driver in C: VolcanoBox Drivers or install from any other source
• . open Volcano Now tool (always use the latest version)

• Enable IMEI Now, click button (1) .
• Now is a picture of massage
• Now click Yes

• Now select the Android tool and click RUN

• Now select New Method 65xx
• Now enter IMEI IMEI BOX
• Now click Write IMEI
• Now remove the phone battery and insert the battery again
• Now connect the terminal with the USB cable (headset must be in the oFF mode)

• Now wait complete the process
• after a full process see ” write IMEI Done “

Note: never change IMEI because it is eligible. you can restore the original IMEI after firmware upgrade or if you lose IMEI. We recommend using the original IMEI and IMEI change Neve
.